Adapterplattor för Walther Q5 Match SF

Tillverkare

Modell

Adapterplattor för Walther Q5 Match SF

(5 produkter)

Walther Q5 Match SF är en precisionstillverkad prestandapistol, mycket populär inom tävlingsskytte. Den levereras med en optics ready-slide, men för att montera ett rödpunktsikte krävs rätt adapterplatta på grund av det proprietära monteringsgränssnittet.

Den här kategorin innehåller adapterplattor (adapterplattor) specifikt tillverkade för Walther Q5 Match Steel Frame (SF). Dessa adapterplattor möjliggör en säker och pålitlig passform för populära rödpunktsikten, vilket bibehåller precision och träffpunkt även vid krävande användning.

Oavsett om du monterar ett Trijicon, Leupold, Holosun eller annat större rödpunktsikte, erbjuder vi ett urval av plattor som matchar din optiks footprint och är precisionsbearbetade för Q5 Match SF:s slide.

Plattor tillgängliga för stora rödpunkts-footprints

Vårt sortiment inkluderar monteringsplattor kompatibla med de mest använda rödpunktsikten, inklusive:

Trijicon RMR / SRO
Leupold DeltaPoint Pro
Shield RMSc
Holosun K-Series
Docter / Noblex / Vortex Venom
Aimpoint Acro
C-More RTS / STS

Specifikt designade för Walther Q5 Match SF

Alla adapterplattor i denna kategori är konstruerade för att passa den fabriksoptics ready-utskärningen på Walther Q5 Match Steel Frame. De är inte kompatibla med PDP eller andra Walther-modeller med olika optikgränssnitt.

Letar du efter plattor till en annan Walther-modell? Se vårt kompletta utbud av Walther rödpunkts-adapterplattor här.

Sikten till Walther Q5 Match SF

Även om du planerar att använda ett rödpunktsikte kan du vilja ha backupsikten eller co-witness sikten. Vi erbjuder ett brett urval av sikten till Q5 Match SF för detta ändamål.

Behöver du hjälp att välja rätt adapterplatta?

Osäker på vilken rödpunktsplatta som passar din Q5 Match SF? Kontakta oss så hjälper vi dig att hitta den bästa lösningen för din optik och pistol.

Kompatibilitet

Vilka rödpunktsikten kan jag montera med era plattor?

Baserat på den valda rödpunktsplatta kan du montera följande rödpunktsikten:

Shield RMSc standard

ADE Advanced Optics

ADE Advanced Optics RD3-018 Spike
ADE Advanced Optics RD3-021 Nuwa

Burris

Burris FastFire C

JPoint

JPoint MRD

Canik

MECANIK MO1

Osight

Riton

Riton X3 Tactix PRD

Shield

Sig

Sig Romeo Zero
Sig Romeo-X

Sightmark

Sightmark Mini Shot A-Spec M3

Swampfox

Swampfox Sentinel 1×16

UTG

UTG OP3 Mini Micro

Vector Optics

Vector Optics Frenzy-S 1x16x22
Vector Optics Frenzy-S 17x21 Gen.2
Vector Optics Frenzy-S 1x17x24 MIC
Vector Optics Frenzy-S 1x17x24 SAS
Vector Optics Frenzy-S 1x17x24 MOS Multi Reticle
Vector Optics Frenzy-S 1x19x28

Vortex

Vortex Defender CCW

Docter standard

ADE Avanced Optics

ADE Advanced Optics RD3-006 Huracan
ADE Advanced Optics RD3-009 Crusader
ADE Advanced Optics RD3-012 Delta
ADE Advanced Optics RD3-013 Bertrillium
ADE Advanced Optics RD3-015 Zantitium

Athlon

Athlon Midas TSR1

Burris

Burris Fastfire 2
Burris Fastfire 3
Burris Fastfire 4

Leica

Leica Tempus
Leica Tempus 2

Noblex

Noblex NV Sight II plus
Noblex NV Sight III
Noblex NV Sight C
Noblex NV Sight G

MAKDot

MAKdot SH

MECANIK

MECANIK MO2

Sightmark

Sightmark Mini Shot M-Spec

Springfield Armory

Springfield Armory Hex Dragonfly

US Optics

US Optics DRS 2.0
US Optics DRS 2.0 Enhanced

Vector Optics

Vortex

Vortex Venom [pre 2024]

C-More RTS standard

Benthley

Benthley TSX6
Benthley A1

C-More

C-More RTS 2
C-More STS 2
C-More RTS 3
C-More STS 3

Delta Optical

Delta Optical MiniDot HD 24
Delta Optical Stryker

Kahles

Kahles Helia RD

Kite Optics

Kite Optics K1

Sig

Sig Romeo 3
Sig Romeo 3 Max
Sig Romeo 3 XL

Toni System

Vector Optics

Vector Optics Frenzy 1x26x32
Vector Optics Frenzy Plus 1x22x32

Vortex

Vortex Razor

Leupold Delta Point Pro standard

Bushnell

Bushnell RXS-100
Bushnell RXS-250

Eotech

Eotech EFLX

Holosun

Holosun SCS 320

Leupold

Leupold Delta Point Pro

Primary Arms

Primary Arms GLX RS-15
Primary Arms GLX RS-15 ACSS Vulcan

Sig

Sig Romeo-X PRO
Sig Romeo-X PRO Enclosed

Vortex

Vortex Defender ST
Vortex Defender XL
Vortex Venom [post 2025]

Meopta standard

Meopta

Meopta Meosight III
Meopta Meored

Till vilka modeller kan jag montera dessa plattor?

Baserat på den valda rödpunktsplatta kan du montera den på följande modeller:

Walther PPQ Q4 [Optics Ready]

Walther PPQ Q4 SF OR [Optics Ready]
Walther PPQ Q4 TAC [Optics Ready]

Walther PPQ Q5 [Optics Ready]

Walther PPQ Q5 Match SF [Optics Ready]
Walther PPQ Q5 Match SF Black Ribbon [Optics Ready]

Fits perfectly without the gasket that you’re supposed to use with it.

First thing the plate fit perfectly, but the one I added the gasket and then the optic not one single screw would screw in. So I tried and tried for quite some time took a break came back put the optic on without the gasket put a screw in, turned it and it bit down, which I was amazed, so I kept screwing and went all the way in took the other screw put it all the way in and I had a winner! So one by one I took the two screws out blue Loctite and snuggled back down. Shake awake optic from Amazon works perfectly.

Beretta [APX A1 & APX RDO] Optics Ready plate | Trijicon RMR footprint

Alles top gerne wieder

Walther [PPQ, P99, Creed, PPX & PPS] red dot mount | Trijicon RMR footprint

Front peg adjustment

The front pegs were too large of diameter and I had to machine them down to the proper size.

Taurus [G3, G2S, G2C, TX22] red dot mount [20.5 mm] | Trijicon RMR footprint

Great optic mount

The Toni Systems mount fit perfectly to my Beretta 92XI Gara. There was a snag with FedEx shipping but the service people at Optics Spot were very helpful in resolving the snag.

Beretta [92X, 92XI, 92 GTS, 92X RDO, M9A4] Optics Ready plate | type B [RMR & RTS footprint]

Great tool

Perfect

The ONLY Place to Shop

Optics Spot was the ONLY website that offered both front and rear fiber optic sights for my Beretta M9A3

Beretta [92A1, 92X, 92XI, 98A1, M9A3 & other] adjustable sights | with fiber optics

Hard to mount on 1911 22lr

The osight came with a lot of hardware to use but none of them worked. Had to go to the shop to get the right length screws.

1911 .22 LR [GSG Cut] red dot mount | Shield RMSc footprint

MOS adapter plate

Excellent fit and workmanship

Red dot mount Glock models [G17, G19, G26 & other] | Shield RMSc footprint

Adaptateur pr

Très bon matériel. Adapté pour le canik mété sf

Canik METE Optics Ready plate | type C [RMR, Docter, RTS footprint]

Bien mais fragile !!!!

ATTENTION À LA VIS DE RÉGLAGE EN ÉLÉVATION !!!!
Je ne doute pas de la qualité SHIELD et Ce n'est pas mon premier point rouge et la finesse de réglage ne m'avait jamais posé problème. La, la vis pour l'élévation semblait tourner dans le vide après plusieurs réglages sur différentes armes. Puis, plus de mouvement du point !! Pas de point dur ressenti me faisant penser que j'ai "forcé" comme une brute🐂, 500€ par la fenetre😭

M3x8 are for MOS cover, M3x6 for MOS red dot plate (Gen 5 Glocks)

Those are for the MOS cover plate. For MOS red dot plates use TX10 M3x6 steel (at least 10.9 or higher quality).

Screws for Glock MOS red dot plates | 2pcs

Parfait

Parfait pour un HK USP custom et Vortex defender.. tiré 200 cartouches , pour l'instant tout va bien 👍

HK USP & USP Tactical red dot mount universal | type S [RMSc, DPP, K-series footprint]

So far so good had it installed today need a little fine tuning but it fit thank you.

1911 [BoMar Cut] adjustable rear sight | with white dots

Works fantastic!

Easy to set the right torque and works pretty accurately!
Great tool to mount red dots etc.

Płytka montażowa

Rewelacja, wszystko pasuje idealnie, a do tego tańszą niż na rynku krajowym

CZ Shadow 2 Optics Ready plate | Shield RMSc & Holosun K-series footprint

Geen levering

Ik heb dit plaatje besteld bij jullie, maar nooit gekregen. Er moest afgetekend worden voor dit item, maar is nergens terug te vinden, en ik heb zeker geen handtekening gezet. UPS niet te bereiken, ik zou graag een bewijs van levering zien

Walther PDP 2.0 [2022] Optics Ready plate | Shield RMSc footprint

très fragile!

très fragile, cassé en essayant de le mettre en lieu et place

Springfield [XD,XDM] & HS Produkt [XDM, HS-9, SF19] adjustable sights | with fiber optics

Sig p320 x full

The red dot is so high up, you can't see the sights, even with a high sight.

Sig P320 Optics Ready plate | type C [RMR, RTS & Docter footprint]

Perfect fit with my red dot Frenzy!!

Many thanks to French support team for valuable advise

Beretta [APX A1 & APX RDO] Optics Ready plate | Docter footprint

Great optic!

Mounted on a G48 MOS. No adapter plate needed and fits perfectly. Co witness with stock GLOCK sights is also really good.

The greed 6 MOA dot is super crisp - even on higher brightness settings.
I also love the size of the larger green dot, since it’s easy to pick up on fast draws.
Overall it really fits my carry gun nicely!

Very easy to install and use !

I bought it last week and I received in 2 days
It was very easy to install with the G30 mount, it tooks me 10 min !
Thanks Paul for your answers

Great sight picture

Me and my wife both put these Night Fision Tritium sight on our CZ P-09 pistols.
And what a difference it is , these Tritium front sights make picking up your front sight post and acquiring a correct sight picture so much easier and faster.
Would highly recommend to anyone using iron sights.